CobraTork™ - Zinc Plated

CobraTork™ - Zinc Plated

The Cobra Tork™ ZP heavy duty concrete screw anchor features a raised head for better grip, a notched thread making it easier to cut through the concrete, and cavities designed to collect the debris. Also, the anchor can be easily removed if required. One-piece concept: Just drill and drive.

Features and benefits
  • Size stamped on head for easy identification.
  • Shallow embedment.
  • Corrosion resistant.
  • Raised head for better grip formed with anti rotation washer.
  • Chamfered tip to facilitate the insertion.
  • Notched thread making it easier to cut through the concrete.
  • Special body design with cavities to collect the debris.
View all selection
Installation Tools
Drill Wrench
Mounting Surface
Brick Concrete
Video

Applications
  • Bleachers
  • Heat pumps
  • Racking
Installation Guide

  1. Drill a hole into the base material to a depth of at least 1/4'' (Deeper than installation anchor depth).
  2. Clean hole using a dust blower or compressed air.
  3. Insert the anchor through the fixture into the anchor hole. Tighten the anchor by rotating clockwise and applying pressure towards the base material.
  4. Continue tightening the anchor until the head is firmly seated against the fixture.

Note: In extremely dense materials, use of an impact wrench is recommended.

Technical Specifications
SKU Description Anchors Per Pack Safe Load Weight (Ibs) Drill size Min embedment Packaging
962CZ COBRATORK™️ ZP 1/4" X 3" ZINC PLATED (X50) 50 1389 1/4" 2-1/2" COBRATORK™️ ZP 1/4" X 3" ZINC PLATED (X50)
960CZ COBRATORK™ ZP 1/4" X 1-3/4" (X100) 100 734 1/4" 1-1/2'' COBRATORK™ ZP 1/4" X 1-3/4" (X100)
961CZ COBRATORK™️ ZP 1/4" X 2-1/4" (X50) 50 1259 1/4" 2" COBRATORK™️ ZP 1/4" X 2-1/4" (X50)
965CZ COBRATORK™️ ZP 5/16" X 2-1/4" (X50) 50 1282 5/16" 2'' COBRATORK™️ ZP 5/16" X 2-1/4" (X50)