The Nylon Nail Anchor has a low-profile finish, is corrosion resistant, and is quick and easy to install. This one-step installation allows for the anchor to be placed through the object to afix, and then hammered into the pre-drilled hole. Three head styles are available: Flat, Round and Mushroom. Available in diameters 3/16" and 1/4".
Note: This anchor is not recommended for overhead applications.
1. Drill a pilot hole into wall.
2. Insert the anchor through the object you need to afix and insert into the wall.
3. 4. Using a hammer, tap the Nylon Nail into the wall until flush.
SKU
Description
Anchors Per Pack
Drill size
Packaging
355C
NYLON NAIL-IN ANCHORS ROUND HEAD WITH SCREWS 3/16" X 1" (X100)
100
3/16"
356C
NYLON NAIL-IN ANCHORS ROUND HEAD WITH SCREWS 3/16" X 1 1/2" (X100)
100
3/16"
357C
NYLON NAIL-IN ANCHORS ROUND HEAD WITH SCREWS 1/4" X 1" (X100)
100
1/4"
358C
NYLON NAIL-IN ANCHORS ROUND HEAD WITH SCREWS 1/4" X 1 1/2" (X100)
100
1/4"
359C
NYLON NAIL-IN ANCHORS ROUND HEAD WITH SCREWS 1/4" X 2" (X100)