Nylon Nail-In Flat Head with screws

Nylon Nail-In Flat Head with screws

The Nylon Nail Anchor has a low-profile finish, is corrosion resistant, and is quick and easy to install. This one-step installation allows for the anchor to be placed through the object to afix, and then hammered into the pre-drilled hole. Three head styles are available: Flat, Round and Mushroom. Available in diameters 3/16" and 1/4". Note: This anchor is not recommended for overhead applications.
Features and benefits
  • One-Step installation
  • Anchor size = Hole size
  • Fast and easy to install
  • Corrosion resistant
  • Not recommended for overhead installation
View all selection
Installation Tools
Drill Hammer
Mounting Surface
Brick Concrete
Applications
  • Architectural facades
  • Ornamental fixtures
  • Roofing
Installation Guide
1. Drill a pilot hole into wall.
2. Insert the anchor through the object you need to afix and insert into the wall.
3. 4. Using a hammer, tap the Nylon Nail into the wall until flush.
SKUDescription Anchors Per Pack Drill size Packaging
354CNYLON NAIL-IN ANCHORS FLAT HEAD WITH SCREWS 1/4" X 2" (X100) 100 1/4" NYLON NAIL-IN ANCHORS FLAT HEAD WITH SCREWS 1/4" X 2" (X100)