Masonry Anchors

Parawedge - Specialties

The Parawedge™ anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole.

Features and benefits
  • The Wire Hanger is especially design for overhead applications (pipes, lightings, ducts)
  • The Tie Down Hook is for general construction uses, overhead installations, fasten mesh fence to a wall
  • The basic features are the same as the regular Parawedge
View all selection
Installation Tools
Drill Hammer
Mounting Surface
C
Applications
  • Architectural facades
  • Ornamental fixtures
  • Railings
  • Satellite dishes
  • Signs
Installation Guide

WIRE HANGER

1. Drill an appropriate size hole into base material
2. Clean hole using a dust blower or compressed air.
3. Insert the anchor into the hole.
4. With a hammer or light mass, push down the anchor until the top of the threaded part .
5. With the prongs of the hammer, lift the anchor to activate the locking mechanism.
6. Pass the metal wire through the eyelet and fix it to the object.

 

TIE DOWN HOOK

1. Drill an appropriate size hole into base material
2. Clean hole using a dust blower or compressed air.
3. Insert the tie down hook into the hole.
4. With a hammer or light mass, push down the anchor until the top of the threaded part .
5. With the prongs of the hammer, lift the anchor to activate the locking mechanism.
6. Hang the object you need to affix to the anchor.

Technical Specifications
SKUDescription Anchors Per Pack Safe Load Weight (Ibs) Drill size Min embedment Packaging
517CPARAWEDGE ZINC PLATED TIE-DOWN HOOK 1/4" X 2" (X100) 100 436 1/4" 1-1/8" PARAWEDGE ZINC PLATED TIE-DOWN HOOK 1/4" X 2" (X100)
528CPARAWEDGE ZINC PLATED TIE-DOWN HOOK 3/8"X 4 1/4" (X50) 50 772 3/8" 1-5/8'' PARAWEDGE ZINC PLATED TIE-DOWN HOOK 3/8"X 4 1/4" (X50)